Guinea Pig

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

One of the things mom got for Christmas this year was a new camera lens.

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

Dubbed a “nifty fifty” lens, mom’s new lens has been praised by professional pet photographers for it’s use in taking portraits of many a furry friends.

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

While mom is busy learning how to take better pictures with said camera lens, I bet you can guess who her guinea pig has been.

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

Although it’s still to-be-determined if this lens is capable of capturing my stunning good looks.

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

Oh, who am I kidding, the camera loves me!

Guinea Pig - Testing out the new Nifty Fifty Lens // Ammo the Dachshund

Regardless, it’s pretty exhausting being a guinea pig, and I think I’ve earned a 3 hour nap after this photoshoot.Ammo the Dachshund

Camera lens image from here.

DIY Weave Poles with the Dog Agility Shop

DIY Dog Agility Weave Poles // Ammo the Dachshund

I’m at the point in my Dog Agility training that I’m going to start learning how to do weave poles. Learning to do weave poles is one of the most challenging things in Dog Agility, so mom says it’s important that we have our own set at home to practice in between classes.

So when my friends over at the Dog Agility Shop offered up a set of Spikes and Pole Placers, I knew it was time to jump right in and DIY a set of weave poles!

Building your own set of weave poles is super easy and cost effective (about $25) with the help of the Dog Agility Shop. Here’s what you’ll need…..

DIY Dog Agility Weave Poles // Ammo the Dachshund

DIY Dog Agility Weave Poles

Supplies Needed:

  • A set of 6 or 12 Spikes from the Dog Agility Shop (I used 6 since I’m a beginner)
  • Weave Pole Placer from the Dog Agility Shop
  • 3/4 inch PVC Pipe (total of 228″)
  • Six 3/4 inch PVC caps
  • PVC cutting tool
  • Duct Tape

Directions:

Once your Spikes and Pole Placer arrive from the Dog Agility Shop you will need to cut your 3/4 inch PVC pipe into 6 pieces that are 38 inches in length. Then place the PVC caps on one end of all your poles and attach the other end to the Spikes. Then you can stripe your poles with colored duct tape to make them more visible. Once your poles are done, lay out the pole placer, and place your poles into the ground through the grommet holes in the placer. Now you’re ready to learn weave poles!

DIY Dog Agility Weave Poles // Ammo the Dachshund

Inexpensive, easy to set-up, easy to transport, and oh so much fun – these weave poles are looking great in my backyard!

DIY Dog Agility Weave Poles // Ammo the Dachshund

Sadly there are no super cool photos of me weaving through these poles like a pro (yet), because I’ve only just begun my training.

DIY Dog Agility Weave Poles // Ammo the Dachshund

DIY Dog Agility Weave Poles // Ammo the Dachshund

Having these bad boys in my back yard will give me no excuse to not show up everyone in my class when it comes to the weave pole training.

DIY Dog Agility Weave Poles // Ammo the Dachshund

DIY Dog Agility Weave Poles // Ammo the Dachshund

My classmates are gonna be sooooo jealous! Ammo the Dachshund

For more agility tutorials check out my post on Building your own Dog Agility Jumps.

Disclosure: I received a set of spikes and pole placer from the dog agility shop for review. However, all opinions are entirely my own.

 

Sponsor Welcome: Dog Agility Shop

I’m super excited to welcome my new blog sponsor, the Dog Agility Shop!

Dog Agility Shop // DIY Agility Equipment Supplies // Ammo the Dachshund

The Dog Agility Shop is the perfect place for those of you who want to build your own set of agility equipment at a very reasonable price. From jump cups and pole placers to full package starter sets, they are your one stop shop for all of your agility equipment needs.

Dog Agility Shop // DIY Agility Equipment Supplies // Ammo the Dachshund

Not only that, but they ship all over the World – with free shipping to anywhere in the United States!

Dog Agility Shop // DIY Agility Equipment Supplies // Ammo the Dachshund

You might remember that I purchased some of their jump cups to use on my own set of DIY Dog Agility Jumps. They’ve worked wonderfully and saved Mom so much money by being able to build the jumps herself.

Dog Agility Shop // DIY Agility Equipment Supplies // Ammo the Dachshund

ammo the dachshund diy dog agility jumps

I hope you’ll swing by the Dog Agility Shop and check out their full line of equipment! Make sure you tell them your pal Ammo sent you.Ammo the Dachshund

DIY: Build Your Own Agility Jumps

*This post contains some affiliate links

For those of you that follow me on Facebook, you probably know that I recently have started taking agility lessons. While being an agility loving Dachshund isn’t a new concept, some might think that due to my short legs and long back that agility might not be the sport for me. But lucky for me, my mom believes that being active and fit are more important to keeping me healthy in the long run than making me sit on the sidelines. Agility might not be for every dog out there, but for me it is one of those things that keeps me motivated to run my little tushie off and keep the middle of my “hot dog” from touching the ground.

ammo the dachshund diy dog agility jumps

So with my start into the World of agility, mom decided to help me build a set of my very own agility jumps for the back yard. Lucky for you I made sure we documented the entire process so that you too can build your own backyard set!

DIY: Build You Own Agility Jumps

The following step-by-step tutorial will show you how to build two jumps for your dog for about $40 in materials (we did most of our shopping at Lowes).

ammo the dachshund diy dog agility jumps

Materials:

  1. Two 10′ pieces of 3/4″ PVC pipe (this will make 4 jump poles)
  2. Three 10′ pieces of 1″ PVC pipe
  3. Eight PVC “T” connectors for 1″ pipe
  4. Twelve PVC end caps for 1″ pipe
  5. Tape measure
  6. PVC pipe cutter (a circular saw or hand saw can be substituted)
  7. Sharpie (or item to mark the pipes with)

*You will also need to either purchase or make your own jump cups for this project. We opted to buy our own jump cups.*

ammo the dachshund diy dog agility jumps

It’s also helpful if you have a supervisor for this project on hand – if you do not have one I’m happy to lend my services for a nominal fee, you know where to find me.

ammo the dachshund diy dog agility jumps

Next you will need to make some cuts in the 1″ PVC pipe. After measuring and marking your cuts with a sharpie, you can use a pipe cutter or a circular saw to make your cuts.

ammo the dachshund diy dog agility jumps

Cuts to Make on 1″ PVC pipe:

  1. Eight 12″ pieces
  2. Four 1 3/4″ pieces
  3. Two 50″ pieces
  4. Four 30″ pieces

*make sure you are only making your cuts for these out of the 1″ PVC pipe (you will cut the 3/4″ pipe to make the jump poles later)

Next you will start the assembly process – if you prefer to make your jump really secure you can use PVC pipe glue to attach the pieces, but we opted to forgo the glue and just tightly assemble each piece. This way the pieces can be disassembled later or put away for the winter.

Assembly:

ammo the dachshund diy dog agility jumps

1. Create the feet of your jump by slipping the 12″ PVC pieces into the top and bottom ends of your “T” connectors. Then add an end cap to each end of the pipe.

ammo the dachshund diy dog agility jumps

2. Next add the 1 3/4″ PVC pieces to the open end of the “T” connector.

ammo the dachshund diy dog agility jumps

3. Then add another “T” connector to the ends of your 1 3/4″ pipe, make sure they face in the directions pictured above.

ammo the dachshund diy dog agility jumps

4. Add the 50″ PVC pieces in-between your two “feet”.

ammo the dachshund diy dog agility jumps

5. Place your 30″ PVC pieces into the open “T” connector and then add an end cap to the top of each pipe.

ammo the dachshund diy dog agility jumps

At this point your jumps are nearly complete, but you will need to add jump cups to them. You can purchase a set of jump cups* for $19 for a set of 10 (make sure you purchase the 1″ pipe size). After you have your jump cups you will need to measure the distance between the jump cups to determine how long your jump poles need to be. In our case this was 49 3/8″ wide.

ammo the dachshund diy dog agility jumps

So out of the 3/4″ PVC pipe you purchased cut 4 pieces at 49 3/8″ (or the measurement you took between the poles after attaching your jump cups).

After making your cuts for your jump poles, you might decide to paint the poles. According to the AKC Agility Rulebook, jump poles must be striped for visibility, so who was I to argue with adding a bit of color!

ammo the dachshund diy dog agility jumps

After taping off some stripes on my poles with painters tape and newspaper mom let me choose the color I wanted from the cans of spray paint we had in the basement.

ammo the dachshund diy dog agility jumps

After a few coats of flashy blue paint, my jump poles were looking mighty fine. (You can also stripe your poles with colored electrical tape).

ammo the dachshund diy dog agility jumps

And then after letting them dry overnight, they were finally finished, and they were glorious!

ammo the dachshund diy dog agility jumps

Oh and don’t worry, I only jump a 4″ height for practice – but I had mom and dad make me an extra jump rail for when Trooper comes over to practice with me.

ammo the dachshund diy dog agility jumps

Putting my new agility jumps to the test was the best part though!

ammo the dachshund diy dog agility jumps

Look at me, I can fly! 

 

I’ve created this handy PDF for you to download that has all the instructions you will need to make your own set of DIY Dog Agility Jumps. Happy Jumping!

 

*These jumps are intended to be used for backyard fun. If you plan to build jumps for competition use make sure you build your jumps to rulebook specifications.

 

Disclaimer: To the best of our knowledge this equipment is entirely safe, however, we are not liable for any damages or injuries you or your dog may sustain from following these instructions. Use your best judgement when building equipment for your dog – and be safe! 

Flying High at the Dog Park

Over the weekend mom and dad took me to the dog park.

I was having a fantastic time chasing float-away leaves in the stream until I noticed something new at the park!

ammo the dachshund at dog park

Dog agility jumps! Being one to never pass up an opportunity to practice my high-flying super hero skills I couldn’t resist testing them out.

ammo the dachshund at dog park

All the big dogs were jealous, because man was I FLYING!

ammo the dachshund at dog park

I bet you’re jealous too! Skills like this are hard to come by and I totally rocked those dog agility jumps.

ammo the dachshund at dog park

Warp speed baby – so lightning fast even my ears are left behind!

Training Super Trooper

I might have worked my poor friend Trooper to near exhaustion.

The horses talked it over and agree, that’s one tired pooch!

But honestly, how does Trooper think he’s going to earn his cape if he doesn’t practice? And practice hard!

I admit, I’m a pretty tough trainer.

And sometimes, Trooper just needs someone to show him what to do…..

Yeah I know I’m so amazing. But, lets just hope I whip Trooper into shape before his big performance!